BoltHold SP12-38 Asphalt Anchor, 6-PACK Hardware material:Stainless steel The SP12 anchors are mounted

The SP12 anchors are mounted flush with the surface of the roadway

Due to the size of the SP58 drill bit requires a specific SDS Max bit

you will need to replace the mixing nozzle as the epoxy is likely to have started to harden in the nozzle

While bit life varies with the surface of the asphalt and the gravel under it

4" diameter header at the top of the anchor prevents the anchor from dropping below the surface

BoltHold SP12-38 Asphalt Anchor, 6-PACK Hardware material:Stainless steel The SP12 anchors are mountedBoltHold SP12 is a medium duty asphalt anchor rated at 2,000 lbs. pull. The anchor is designed for mounting plates, fences, machinery and the like directly to asphalt surfaces. The 12" long SP12 38 incorporates a 3 8" 16 UNC female internal thread. The length of the bolt inside the anchor should not exceed 5". The anchor requires a 7 8" hole 12" deep and the use of a grout such as our EPX2 or EPX3. A 1. 4" diameter header at the top of the anchor